Industrial 8840 Series Slot Half Round Aluminium Profile

We can offer you full set of t-slot aluminum extrusion profiles,including t nuts,brackets,bolts ,end caps etc. Please tell me your requirements,then I can offer you full set of t-slot and related accessories.

Mold Workshop
Die and tooling are the most critical process for aluminum extrusion profile. Our die branch makes dies with state of computerized equipments, which ensures the die to be running properly fit to each individual extrusion press. We always work closely with our client to particular operational needs so completely that there is no big error in the process of making.

Extruding Line
Aluminum alloy surface is checked by qualityman to make sure it is clean without any deformities. Dies must be tested and corrected to high precision.The alloys are extruded to aluminum profiles of various shapes which depending on the dies used.

Anodizing Line
Anodizing is a process to produce aluminum oxide coating on the profile's surface, so as to protect it form natural oxidizing, thus enhance its hardness and durability against different weather conditions.

Powder Coating Line
Powder coating is a process to coat the aluminum profiles with a synthetic powder of a wide range of colors.Aluminum profile surface is degreased to remove oils and greases firstly. Any present oxide layer is etched by dipping the profiles in an acid activation tank. Profiles are then rinsed with deionized water to remove any remaining chemicals. Now the profiles are ready to undergo the chemical conversion coating.

Processing Machine
We have all been equipped with several dozens of world's most advanced production & processing facilities which are mainly imported from Germany,, Japan,Taiwan, etc. The ratio of new equipment is increasing year by year.The advanced production equipment are capable of handling most of request for complex and high precision processing of various types of aluminum extrusion profiles

Q1: What's the standard length of your aluminium profiles be shipping?
A: The standard length of aluminium profiles is 6meter, we can cut to specific length as you need.

Q2: What's your MOQ?
A: We can accept trial orders for prototype, there are plenty of stocks in factory, and can be shipped very fast.

Q3: What's the thickness for anodizing? Can you do 15um?
A: Our normal thickness is about 10-12 um. Yes, we can do 15um and above.

Q4: What color you can do for powder coating? The thickness for powder coat?
A: We can do any color for powder coat as long as you can provide the color sample. Our normally powder coating thickness is 60-80um.

Q5: What's the lead time for small order and mass production?
A: 1~3 working days for small order, and 3~15 working days for mass production of material.

Q6: What certification do you have? What's your standard?
A: We have ISO certification. Our standard is DIN, AAMA, AS/NZS, China GB.

Q7: What's the packing way?
A: Commonly we use plastic film and kraft paper, also we can make as per customers' requirements